When I first saw our Holiday Ornament framelits this tree popped into my head. The Candlelight Christmas paper just matched my vision perfectly. Although I used the smallest ornament and the smallest diamond shape to create this great tree. I added pearls and a Crumb Cake seam binding ribbon with small pearls scattered about. I found the Styrofoam tree cone at Michael's. I will warn you it did take 4 sheets of 12 x 12 paper. I started using the smallest diamond shape 4 rows from the top. Do start at the bottom and I also used a low temp glue gun to assemble. Enjoy and have a great day.
Brenda
CutColorPaste is a place to get ideas and to share thoughts. I love to share my love for papercrafting. You are welcome to duplicate any project you see.Please if you are a demonstrator and purchase a tutorial for a class please purchase one for each guest. I have put alot of time into creating these classes for you. I love to share everything but please give me the acknowledgement for my work, thanks Have fun and create, create, create. Your comments are always welcome.
Oct 24, 2012
Oct 23, 2012
Stamp a Stack
These are the cards I featured in my Stamp a Stack. We made 5 of each card. We also did these at retreat. I think we are all set for the holidays. We also made boxes for these cards. I will post a clearer picture of the snowmen card, there is so much bling it sparkles and shines, lol! These cards were very easy to duplicate just A LOT of prep work. I think they turned out great.
Retreat Projects
These are a few of the cards we made at Retreat using our retired felt pieces and our current festival tags. I think they came out great. We had such a good time, 4 days of stamping, laughing, and snacking. I can't wait to do it again! We made 5 of each card, with matching boxes.
Oct 20, 2012
Sep 22, 2012
A Christmas Keepsake
A Christmas Keepsake
Instructions written by: Brenda Anderson
Supplies Needed:
Stamp set: Candlelight Christmas
Framelits: Candlelight Christmas Framelits
Inks: Real Red, Lucky Limeade
Designer Series Paper: Candlelight Christmas
Die: Rosette OR Scalloped edge punch and Simply Scored
Accessories: Cherry Cobbler Tulle Ribbon, Vintage Buttons, Large Pearls, quick dry glue,
Silicone Craft Mat, Low temp Glue gun and glue sticks, linen thread, 1/8 circle punch, large scallop punch.
You will need to stamp 20 ornaments in Lucky Limeade and 20 ornaments in Real Red. Looking at the sample you will be able to determine which ornament to stamp. Once you have those stamped (that should take 10 minutes), then die cut them (that should take 10 minutes).
Once that is done fold 15 of each in half, the stamped side faces the inside. Then you will start assembling each section. You will glue 3 of each ornament back to back to create a 3-D ornament using the quick dry glue. Then using 1 of the 5 flat ornaments glue in place on the back stamped side facing you. Repeat 4 more times. Set these aside. Repeat the same process using the red ornaments. Set aside.
* If you are making these for gifts I would do all the prep work prior to assembling .
The tulle tuffs are created by cutting 3 scallop sections. In other words count 3 bumps and cut. Place a small dab of low temp glue in the center, fold over and twist. Holding the tuff together trim the top on an angle. Make 5 for each ornament. For the rosette in the middle cut 2 strips of Candlelight Christmas DSP 1 inch wide. Then using your big shot pick either the scallop edge or the pinking edge and cut. Attach the pieces using quick dry glue and set aside.
Lets assemble this: Using our silicone mat put a half dollar size of glue spread into a circle. Lay your lucky limeade ornaments into the glue shaping your ornament. Next add glue between the sections and lay your tuffs into the glue. Next add more glue and add the red ornaments in between. Refer to photo if needed. Now to add the rosette I folded it together holding it in my hand. Added a strip of low temp glue on my mat and set it into the glue still holding it together. Count to 10 and lift. Forming your rosette should be easier with the glue holding it together. Connect and add glue in the center place rosette into it and hold count to 25. Add more glue and place your vintage button and set pearl in the middle. Let dry for 2 minutes. Punch a hole at the top and add linen thread to hang. Cover your glue spot on the back using the large scallop punch. I hope these help.
Instructions written by: Brenda Anderson
Supplies Needed:
Stamp set: Candlelight Christmas
Framelits: Candlelight Christmas Framelits
Inks: Real Red, Lucky Limeade
Designer Series Paper: Candlelight Christmas
Die: Rosette OR Scalloped edge punch and Simply Scored
Accessories: Cherry Cobbler Tulle Ribbon, Vintage Buttons, Large Pearls, quick dry glue,
Silicone Craft Mat, Low temp Glue gun and glue sticks, linen thread, 1/8 circle punch, large scallop punch.
You will need to stamp 20 ornaments in Lucky Limeade and 20 ornaments in Real Red. Looking at the sample you will be able to determine which ornament to stamp. Once you have those stamped (that should take 10 minutes), then die cut them (that should take 10 minutes).
Once that is done fold 15 of each in half, the stamped side faces the inside. Then you will start assembling each section. You will glue 3 of each ornament back to back to create a 3-D ornament using the quick dry glue. Then using 1 of the 5 flat ornaments glue in place on the back stamped side facing you. Repeat 4 more times. Set these aside. Repeat the same process using the red ornaments. Set aside.
* If you are making these for gifts I would do all the prep work prior to assembling .
The tulle tuffs are created by cutting 3 scallop sections. In other words count 3 bumps and cut. Place a small dab of low temp glue in the center, fold over and twist. Holding the tuff together trim the top on an angle. Make 5 for each ornament. For the rosette in the middle cut 2 strips of Candlelight Christmas DSP 1 inch wide. Then using your big shot pick either the scallop edge or the pinking edge and cut. Attach the pieces using quick dry glue and set aside.
Lets assemble this: Using our silicone mat put a half dollar size of glue spread into a circle. Lay your lucky limeade ornaments into the glue shaping your ornament. Next add glue between the sections and lay your tuffs into the glue. Next add more glue and add the red ornaments in between. Refer to photo if needed. Now to add the rosette I folded it together holding it in my hand. Added a strip of low temp glue on my mat and set it into the glue still holding it together. Count to 10 and lift. Forming your rosette should be easier with the glue holding it together. Connect and add glue in the center place rosette into it and hold count to 25. Add more glue and place your vintage button and set pearl in the middle. Let dry for 2 minutes. Punch a hole at the top and add linen thread to hang. Cover your glue spot on the back using the large scallop punch. I hope these help.
Sep 12, 2012
Great Gift Tags
Hello everyone,
I am not good blogging everyday, sorry. Here is a quick project that doesn't take a whole lot of time.
In person these are stunning. Here's what I used
Cardstock: Very Vanilla and Coredinations Early Espresso
Stamp Set: Snow Flake Soiree
Ink: Early Espresso
Punches: XL Oval Punch, 1/2 inch Circle
Ribbon: Crumb Cake Tulle, Lucky Limeade Ruffled Ribbon
Embossing Folder: Lacey Brocade
Die: Top Note
I would stamp each snow flake then stamp on scrap first then on my tag for a subtle look. The word Believe was stamped full strength.
Thanks for stopping.
Brenda
Aug 20, 2012
Joy to the World
Good morning blog world! I am so sorry I haven't posted all week! Working full time having a family, grandchildren, and taking care of my mother during her Breast Cancer treatment has me spread thin so that doesn't leave much time for blogging. So sorry... Don't give up I have 2 days off starting tomorrow so hopefully I get somethings ready for my blog.
Here's today's post.. I love this new snowflake die!
Card base is Very Vanilla, and I used the Frame embossing folder. I cut Real Red 4.50 x 3.25 and centered it in the frame area. The designer paper is from Candlelight Christmas. It suspiciously looks like the print from Vintage Christmas paper from 2 years ago although that was in Soft Suede and Crumb cake. Love it! Anyways the paper is cut 4.25 x 3. Which is great for workshops because you will get 8 from 1 sheet of designer paper. The snowflake was cut in Very Vanilla and I added a little bling to the ends. I stamped Joy on vanilla with Chocolate Chip ink from the new set Joyous Celebrations in the holiday mini. I punched it out with the XL oval punch. I gave it a little lift with dimensionals. Simple but elegant. Well off to work have a great day!
Here's today's post.. I love this new snowflake die!
Card base is Very Vanilla, and I used the Frame embossing folder. I cut Real Red 4.50 x 3.25 and centered it in the frame area. The designer paper is from Candlelight Christmas. It suspiciously looks like the print from Vintage Christmas paper from 2 years ago although that was in Soft Suede and Crumb cake. Love it! Anyways the paper is cut 4.25 x 3. Which is great for workshops because you will get 8 from 1 sheet of designer paper. The snowflake was cut in Very Vanilla and I added a little bling to the ends. I stamped Joy on vanilla with Chocolate Chip ink from the new set Joyous Celebrations in the holiday mini. I punched it out with the XL oval punch. I gave it a little lift with dimensionals. Simple but elegant. Well off to work have a great day!
Aug 3, 2012
Exploding Christmas Box Tutorial 1.99
Aug 2, 2012
HOLIDAY STAMP A STACK
I did all the measuring and designing! Just follow along and you have a class for 10 stampers! This is a great event in the fall to boost your sales! This tutorial can be purchased for 1.99! The buy botton is to the right! Thanks Brenda
Subscribe to:
Posts (Atom)



